We're an enquiry service, not a demolition contractor. With your consent, we pass your enquiry to an independent local demolition business once one is appointed. How it works

Excavation in Geelong

After a demolition, or before a new build, extension, shed slab or driveway, most Geelong blocks need some digging: a site cut to level the pad, trenches for services, footing holes, or removal of old fill and rubble. With Geelong's mix of basalt rock on the plains, reactive clays and sandy coastal soils on the Bellarine and Surf Coast, the conditions under the surface matter as much as the size of the job.

Geelong Demolition Service is a referral service. We do not do excavation work and we do not set prices. With your consent, we pass your enquiry to an independent local business with suitable machinery and operators. This page is general information, not engineering or professional advice.

Common excavation jobs in Geelong

  • Site cuts and levelling for a new house or knockdown-rebuild
  • Footing and pier holes, and strip footings for extensions
  • Trenching for stormwater, sewer, water, power and NBN connections
  • Driveway and crossover preparation
  • Shed and garage slab preparation
  • Removing old slabs, rubble and fill after demolition (see site clearing)
  • Pool removal and backfill, and retaining-wall cuts

We take enquiries across Geelong and nearby areas, including Armstrong Creek, Lara, Grovedale, Highton, Waurn Ponds, Leopold, Ocean Grove, Torquay and Drysdale. See service areas.

Before anyone digs

  • Locate underground services. Lodge a free enquiry with Before You Dig Australia (BYDA) so asset owners can send plans. Private lines on your property may still need a locator.
  • Read your soil report and plans. A geotechnical (soil) report and engineering drawings usually set the depth of footings and the size of the site cut.
  • Check approvals. Building work and some earthworks need a building permit from a registered building surveyor, and the City of Greater Geelong may need to approve works near easements, trees or in overlay areas. Our demolition permits guide explains how the building permit system works.
  • Trenches deeper than 1.5 metres are high-risk construction work under Victorian rules, requiring a safe work method statement and appropriate support or battering.
  • Rock and sand. Basalt floaters on Geelong's western plains can slow a site cut, while sandy coastal sites may need trench support or battering sooner than clay. Mention any rock in the soil report.

After a demolition

Once the house is gone, excavation is often the next step: removing footings and stumps, digging out contaminated or soft fill, and leaving a level pad ready for the builder. Asking for both quotes together can reduce double handling. See house demolition for the order of works.

What affects the price

  • Volume of soil and rock to be moved, and whether it can stay on site
  • Machine size and access (narrow side paths may need smaller machines)
  • Soil type, rock and groundwater
  • Spoil disposal and tipping fees, especially for fill that needs testing
  • Compaction and engineer inspections

Contractors often price by the hour per machine plus disposal, or as a fixed quote for a defined scope. Ask for disposal to be shown separately.

Frequently asked questions

Do I need a permit to excavate in Geelong?

It depends on the work. Excavation that is part of building work is normally covered by the building permit. Large cuts, retaining walls, works near trees, easements or in overlay areas may need extra approvals. Check with your building surveyor and the City of Greater Geelong.

Can the demolition contractor do the excavation too?

Many demolition businesses also offer excavation and site preparation. Mention it in your enquiry and we will look for a contractor who can quote both.

What happens to the excavated soil?

Clean soil may be reused on site or taken to a facility that accepts it. Soil with rubble, asbestos or contamination must go to a facility licensed to accept it, which costs more.

How long does a site cut take?

A typical residential site cut is often done in one to a few days, depending on size, rock and weather. Wet winters can slow work on clay sites.

Next step

Send your suburb, what needs digging, rough dimensions, any soil report and photos. With your consent, we will pass it to an independent excavation contractor in the Geelong region.

Tell us about your demolition job

Free, no-obligation enquiry. Include your suburb, what needs removing and photos if you can.

Prefer to talk? Call 0480 006 876.

This form sends your project enquiry to Geelong Demolition Service at hello@geelongdemolitionservice.com.au. If you tick the consent box, your enquiry will also be shared with our independent service partner once one is appointed, so they can contact you. Please don't include sensitive personal information.